Bullet R1 Replacement Guides

📄️ Fan Calibration

A Fan Calibration is required whenever the Exhaust Fan Motor, Control PCB Module, or Induction PCB Module has been replaced. You can also run a Fan Calibration whenever the Bullet throws A-01 or A-08 to check if the issue goes away. For more information regarding A-01/A-08, check this page.

📄️ IBTS Module Upgrade Guide

The IBTS Module Upgrade Guide is made for users upgrading from the V1 IR Sensor, but it also serves as an IBTS Module replacement guide. Skip to IBTS Module Replacement Guide if you're only replacing the IBTS Module.

📄️ 3D Printable Exhaust Adapter Files

Below is a zip file containing the STL and STEP files for a set of Exhaust and Cooling Tray Adapters for the Bullet R1. You will find three folders in the zip: